|
Break-Away
Swivels for Directional Drilling
Avoid overstressing cable or conduit being pulled in during directional
drilling operations. The Condux Break-Away Swivels for directional
drilling are designed exclusively to provide both the swivel,
and the break link, for product pullback. Eliminate the use of
two or more components and shorten the gap between the reamer
and pulling eye. No need to use "weak link" pipe sections
or wire, when using the Condux Break-Away Swivel.
Six different
diameter swivels are available to accommodate various pulling
needs. Break loads range from 1,900 lbs. (8,451 N) to 22,000 lbs.
(97,856 N) and are designed to separate at ±10% of their
rated break load. Order Replacement Pins as needed.
NOTE: D.Drill Swivels come with a 90 day limited warranty.
*WARNING: These swivels to be used while Directional Drilling
only— Severe personal injury could result if used with rope
or steel winch lines in cable pulling applications.
|
Break-Away D.Drill® Swivel
1 1/4"-1 3/8"
US Patent No. 4,687,365.
Breakaway
D.Drill® Swivel
1 5/8"-3"
US Patent No. 4,687,365.
US Patent No. 5,607,248.
|
